Contact us

1

Shenzhen can search network technology Co., Ltd.
Telephone: 0755-82450646
Email: kf1@zk71.com
Fax: 0755-27838114
Address: shen zhen bao an qu xi xiang da dao bao yuan hua feng ji jing da sha

Your location:homepage > The industry

Diving mirror Guide

Release date:2017-06-15 14:17:40

 
Choose your own mirror
Whether the diving mirror is suitable is a very critical question. No matter how expensive the diving mirror is, how cool it looks. If it leaks, it's neither cool nor worth the money you spend for it. Because each person's facial contours are different, only when you actually try to wear, can you really choose the diving face mirror. Here are some tips for finding a diving mirror.
Before going to the diving shop. Take all your personal diving equipment as much as possible. If you dive, usually tie a ponytail and try not to forget it when you try it. If you usually dive with headgear and gloves, bring them along. Above all, your regulator, regulator, and two head plug in your mouth will change the shape of your face. Take it with you when you try scuba diving glasses. Once you are ready to test a test dry side mirror, the regulator into his mouth, eyes up, put the mirror in place, remove the confirmation of mirror lacing or turn to mirror the outside, any position of the diving face mirror must face and pay particular attention to the close contact; check the situation between the sun acupoint, nose and mouth. If you have a hood, check the tightness of the hood section, too. The nasal suction test places the regulator in your mouth, takes off the mirror mirror tie, and puts the diving mirror on your face. Take a breath (don't pull it hard), and the diving mirror should suck in your face. Please note that hair and beard affect test status. Nose test if you dive, put on gloves and put it on. Put on the diving mirror and place the regulator in your mouth. The mirror should be easy for you to reach beyond the regulator and hold your nostrils. Make sure the lower part of your nose is not too tight. The respiratory tube test should make sure that the tie lines of the snorkel and the diving mirror are securely attached together. Some straps may be too wide or too narrow, and a 8 - shape clasp can solve this problem. In addition, the mirror lacing must be easily adjusted and not fit into your ear. The characteristics of diving glasses, diving mirror have many characteristics, but here is what most divers need to pay attention to the characteristics of comparison. Low volume. A low volume diving face mirror that cleans easily and helps to balance ear pressure. These diving surfaces have less mirror resistance, and a low volume diving surface mirror measures about 4.5 inches or less than the distance between two temples. Peripheral view: it is important to watch the scene through the edge of your diving mirror. When wearing a diving mirror, test whether you can see the scenery next to it.
Downward view: your regulator and buoyancy vests usually limit the angle of your head down. You sometimes need to look down at your diving list, the pockets of buoyancy vests, and the like. A square shaped diving surface mirror usually has a better downward view.
Upward view: a good upward view will help you see the situation in front of you when you dive.
Vision correction lenses: use two or four frames of diving lenses to fit corrective lenses. Most lens companies can provide standard correction lenses with a precision of 1 degrees C or 1/2 degrees C. Fog removal: lens removal is a very simple matter, as follows: cleaning lenses: dirty lenses are the main problems leading to fog. You can use soft cloth or toothpaste to wipe it.
Follow the manufacturer's guidelines: mist: between two dives, immerse the scuba mirror in water, keep it wet all the time, and help the lens not to fog during the next dive. Leave a little water in the diving mirror. When the surface of the diving mirror begins to fog, just gently tilt your head and rinse off the fog with water.
(editor's note: the most convenient way is to have your own saliva. Don't be stingy. Just spread it on the lens as much as possible. The effect will not be lost to any special anti fog liquid. Whether or not it is the primary criterion for selecting a diving mirror, here is a quick test guide for the selection of diving glasses
1. turn the mirror facing up to the front of the diving mirror
2. put the diving glasses on your face
3. make sure the eye and nose wear comfortably around
4. change the mirror size to find the best fit
5. place the diving mirror at the appropriate position in the face and use your nose to absorb it
6. if the mirror right, should lead to the formation of a vacuum suction diving face mirror cavity, get away when diving face mirror will close in the face.
7., if the diving mirror will still fall, choose again, repeat the above 1-6 process. Tip 1. don't pick an unsuitable face mirror 2.. If you find several mirrors fit you, compare them before you buy them.

Copyright © 2008-2017 .All Rightsreserved Site expert Shenzhen search network technology Co., Ltd. All Rights Reserved

Support:Website | zk71  | Manage